VW T3 BUS Front axle brake adapterAudi Ate 57 Brake disc transformation 312x25mm Brake caliper adapter
- ✓ 312x25 4B0615301A Audi A4 quattro / Audi A6 brake disc
- ✓ 1-piston 4A0615123A / 4A0615124A Audi 100 / A6 C4 Girling / ATE 57 brake caliper
- ✓ front axle
€252.13*
- Express shopping
- Save your data and settings
- Order overview and shipping information
- Manage your newsletter subscription
- 19 Jahre Expertenwissen
Brake caliper adapter to convert the T3 BUS to ventilated 312x25 brake discs with Audi A6 calipers
Advantages of this brake system:
- Top deceleration values
- no more overheating and fading of the brakes
- Very cheap procurement of the components brake calipers used from 49.- € new brake discs from 70.- €
- The material certificate included in the scope of delivery enables entry by individual acceptance even for series vehicles
- Quick and easy assembly possible with the supplied wheel hubs and screws!
Required material for installation:
- Brake discs 312x25 mm Audi A4 quattro, Audi A6 e.g. 4B0 615 301 A
- Brake calipers Audi 100 / A6 C4 Girling / ATE 57 Part No: 4A0615123A / 4A0615124A (left, right)
- Brake caliper brackets that were installed with the 288 brake system.(are required because of the shorter design of the holder Part number: 3B0615125
- At least 16 inch rims should be used
Advice:
This adapter is for all T3 buses built after 1986. Yours before 1986 require the >> adapter with article no. 466 <<
Scope of delivery:
- 2 high resistant adapter-plates
- 2x matching centering rings
- Certificate of material
- Complete set of high resistant srews
- 2x wheel hub for installation on front axle.
- Copy of the german document 'Fahrzeugschein' (equivalent with the English vehicle registration card). Proves the conformity of our product in Germany and simplifies authorization by authorities.
- stress analysis
- installation instructions
The steering knuckle is lightly machined as it is built before 1986, nothing needs to be machined on steering knuckles built after 1986, and a different brake caliper is used, hence the light machining:
Tips, information and hints:
- Important: Only fit for wheel bearing housings from year of construction 1986. This is easy to check, if the original brake caliper was attached with M16 screws, this adapter is suitable.
- For a better ventilation of the brake system, we recommend removing the dust cover plates and brake anchor plates.
- We can generally not answer, which rim size you can mount after your brake conversion. There are simply too many different rims.
- In rare cases it is possible that the rims touch minimal the brake caliper, then you can simply use spacers.
>> Now directly to spacers << - Install the adapter with the necessary components and then check if new brake lines are required. Because, depending on the vehicle, the lines may be too short or the line tips may not suitable. We advise you to change to steel braided brake line because of the quality and technical advantage. Specifically for this, we have developed an online brake line configurator, where you can assemble the type of steel braided brake lines you want. Click here to go to the configurator
>> Configure steel braided brake lines <<
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Login
28 January 2025 07:23
steffen.jens
Alles super
10 January 2026 01:15
thetamedragon
Order delivered on time with no issues
6 February 2023 18:59
Gintautas P
Very happy
1 December 2023 16:07
Wolfgang D
Super Umbau Set. Alles passt genau und wurde schnell geliefert. So macht umrüsten Spaß
20 January 2026 14:16
motorkopf-2008
Order delivered on time with no issues
29 November 2021 07:53
Carl-Magnus L
Allt är som förväntat 👌
| Motor | Motorcode |
|---|---|
| 1.9 | 25|60PS(44KW) |
| 1.6 D | 25|50PS(37KW) |
| 2.1 | 25|95PS(70KW) |
| 1.7 D | 25|57PS(42KW) |
| 1.9 | 25|83PS(61KW) |
| 1.9 | 25|90PS(66KW) |
| 2.1 Cat | 25|95PS(70KW) |
| 1.9 | 25|78PS(57KW) |
| 2.1i | 25|92PS(68KW) |
| 1.6 TD | 25|70PS(51KW) |
| 1.6 | 25|50PS(37KW) |
| 2.0 | 25|70PS(51KW) |
| Motor | Motorcode |
|---|---|
| 1.9 | 24|83PS(61KW) |
| 1.9 | 24|78PS(57KW) |
| 2.1 | 24|95PS(70KW) |
| 1.6 TD | 24|70PS(51KW) |
| 1.7 D | 24|57PS(42KW) |
| 2.1 | 24|112PS(82KW) |
| 1.6 D | 24|50PS(37KW) |
| 2.1i | 24|92PS(68KW) |
| 2.0 | 24|69PS(51KW) |
| 1.9 | 24|60PS(44KW) |
| Motor | Motorcode |
|---|---|
| 1.6 | 21|50PS(37KW) |
| 1.6 | 26|50PS(37KW) |
| Motor | Motorcode |
|---|---|
| 1.9 | 25|60PS(44KW) |
| 1.6 D | 25|50PS(37KW) |
| 2.1 | 25|95PS(70KW) |
| 1.7 D | 25|57PS(42KW) |
| 1.9 | 25|83PS(61KW) |
| 1.9 | 25|90PS(66KW) |
| 2.1 Cat | 25|95PS(70KW) |
| 1.9 | 25|78PS(57KW) |
| 2.1i | 25|92PS(68KW) |
| 1.6 TD | 25|70PS(51KW) |
| 1.6 | 25|50PS(37KW) |
| 2.0 | 25|70PS(51KW) |
| Motor | Motorcode |
|---|---|
| 1.9 | 24|83PS(61KW) |
| 1.9 | 24|78PS(57KW) |
| 2.1 | 24|95PS(70KW) |
| 1.6 TD | 24|70PS(51KW) |
| 1.7 D | 24|57PS(42KW) |
| 2.1 | 24|112PS(82KW) |
| 1.6 D | 24|50PS(37KW) |
| 2.1i | 24|92PS(68KW) |
| 2.0 | 24|69PS(51KW) |
| 1.9 | 24|60PS(44KW) |
| Motor | Motorcode |
|---|---|
| 1.6 | 21|50PS(37KW) |
| 1.6 | 26|50PS(37KW) |
- ✓ Length: 50cm
- ✓ M10x1 curved on the outside
- ✓ M10x1 straight on the inside
- ✓ 268x10 7M0615601 VW Sharan 2.8 VR6 brake disc
- ✓ 1-piston 191615423 / 191615424 Girling 38 brake caliper
- ✓ rear axle
- ✓ Left brake caliper suitable for many Audi A4, VW Passat
- ✓ front axle
- ✓ OE quality
- ✓ Right brake caliper suitable for many Audi A4, VW Passat
- ✓ front axle
- ✓ OE quality
- ✓ 3A0615125 / 3B0615125 / 4A0615125A / 4B0615125
- ✓ Golf 4 GTI / Audi A3 / Audi TT
- ✓ Front axle
- ✓ 280x12 7D0 615 601 VW BUS T4 brake disc
- ✓ 1-piston 701615424 VW BUS T4 brake caliper
- ✓ rear axle
- ✓ Length: 50cm
- ✓ M10x1 curved on the outside
- ✓ M10x1 straight on the inside
- ✓ 280x12 7D0615601 VW BUS T4 brake disc
- ✓ 1-piston 7D0615424B VW BUS T4 brake caliper
- ✓ rear axle
- ✓ 268x10 7M0615601 VW Sharan 2.8 VR6 brake disc
- ✓ 1-piston 191615423 / 191615424 Girling 38 brake caliper
- ✓ rear axle
- ✓ 312x25 4B0615301A Audi A4 quattro / Audi A6 brake disc
- ✓ 1-piston 4A0615123A / 4A0615124A Audi 100 / A6 C4 Girling / ATE 57 brake caliper
- ✓ front axle
- ✓ 5x112 bolt circle
- ✓ Plug & Play
- ✓ VW T3 BUS
- ✓ 288x25 4A0 615 301 Audi A4 Quattro / Audi A6 brake disc
- ✓ 1-piston Girling / ATE 57 4A0615123A / 4A0615124A Audi 100 /A6 brake caliper
- ✓ front axle
- ✓ camber correction plate for rear axle, in order to adjust the camber and the track . With the help of these plates you can change the camber of the rear wheels, negative or positive.
- ✓ drive shaft adapter
- ✓ VW T3
- ✓ 012 Audi gearbox
- ✓
- ✓ VW T3 bus
- ✓ 012 VW / Audi 5-speed
- ✓ simple engine conversion
- ✓ gear adapter plate
- ✓ suitable for VW T3 BUS / box
- ✓ 012 Audi / VW 5-speed gearbox
- ✓ Tie rod end M14x1.5
- ✓ VW, Audi, Golf 1, Golf 2, Golf 3, Corrado,...
- ✓ 100% perfect fit
- ✓ VW T2/ T3 Bus
- ✓ AFN1.9 TDI PD 116 HP engine, transverse installation
- ✓ simple engine conversion
- ✓ VW T3 Bus/Syncro TDI engine conversion
- ✓ Golf 3 starter
- ✓ 0 001 125 012/013 (2.0 KW),0 986 017 460 (2.0 KW)
Checked & suitable by EPYTEC
- ✓ Length: 50cm
- ✓ M10x1 curved on the outside
- ✓ M10x1 straight on the inside
- ✓ 268x10 7M0615601 VW Sharan 2.8 VR6 brake disc
- ✓ 1-piston 191615423 / 191615424 Girling 38 brake caliper
- ✓ rear axle
- ✓ Left brake caliper suitable for many Audi A4, VW Passat
- ✓ front axle
- ✓ OE quality
- ✓ Right brake caliper suitable for many Audi A4, VW Passat
- ✓ front axle
- ✓ OE quality
- ✓ 3A0615125 / 3B0615125 / 4A0615125A / 4B0615125
- ✓ Golf 4 GTI / Audi A3 / Audi TT
- ✓ Front axle
Passendes Zubehör zusammen kaufen und sparen
- ✓ 280x12 7D0 615 601 VW BUS T4 brake disc
- ✓ 1-piston 701615424 VW BUS T4 brake caliper
- ✓ rear axle
- ✓ Length: 50cm
- ✓ M10x1 curved on the outside
- ✓ M10x1 straight on the inside
- ✓ 280x12 7D0615601 VW BUS T4 brake disc
- ✓ 1-piston 7D0615424B VW BUS T4 brake caliper
- ✓ rear axle
- ✓ 268x10 7M0615601 VW Sharan 2.8 VR6 brake disc
- ✓ 1-piston 191615423 / 191615424 Girling 38 brake caliper
- ✓ rear axle
- ✓ 312x25 4B0615301A Audi A4 quattro / Audi A6 brake disc
- ✓ 1-piston 4A0615123A / 4A0615124A Audi 100 / A6 C4 Girling / ATE 57 brake caliper
- ✓ front axle
- ✓ 5x112 bolt circle
- ✓ Plug & Play
- ✓ VW T3 BUS
- ✓ 288x25 4A0 615 301 Audi A4 Quattro / Audi A6 brake disc
- ✓ 1-piston Girling / ATE 57 4A0615123A / 4A0615124A Audi 100 /A6 brake caliper
- ✓ front axle
- ✓ camber correction plate for rear axle, in order to adjust the camber and the track . With the help of these plates you can change the camber of the rear wheels, negative or positive.
- ✓ drive shaft adapter
- ✓ VW T3
- ✓ 012 Audi gearbox
- ✓
- ✓ VW T3 bus
- ✓ 012 VW / Audi 5-speed
- ✓ simple engine conversion
- ✓ gear adapter plate
- ✓ suitable for VW T3 BUS / box
- ✓ 012 Audi / VW 5-speed gearbox
- ✓ Tie rod end M14x1.5
- ✓ VW, Audi, Golf 1, Golf 2, Golf 3, Corrado,...
- ✓ 100% perfect fit
- ✓ VW T2/ T3 Bus
- ✓ AFN1.9 TDI PD 116 HP engine, transverse installation
- ✓ simple engine conversion
- ✓ VW T3 Bus/Syncro TDI engine conversion
- ✓ Golf 3 starter
- ✓ 0 001 125 012/013 (2.0 KW),0 986 017 460 (2.0 KW)